KIller Bee Extractor
the Killer Bee BHO extractor- from the manufacturer of the HoneyBee - made of borosilicate glass and with good thickness, designed to make oil extractions with good returns.
This extractor is made so we can fill it with enough matter which allow us to produce at once a pretty nice amount of BHO, using in the process about 2-3 bottles of gas free of impurities in a row.
It measures 30.5cm long and has a diameter of 6.4cm, with 5mm glass thickness, being shock resistant and very safe if we follow adequate safety measures when using it, always keeping in mind that we are manipulating a glass device.
One end has 5 small holes, which will be responsible for allowing the leakage of the mixture of gas with the oil , and on the other end there is a large hole where we will place the cap with a little hole, where we will place the gas bottle outlet.
When we want to do the extraction, we must find a place outdoors without intense sunlight, making the process with all cautions, wearing gloves or mittens to hold both the gas bottle and the tube, thus avoiding getting burned by the cold.
It is important to firmly handle the tubes, but making just the necessary pression, taking care of neither sustaining them to loosely nor letting them slip because of an excess of pressure.
When all the gas has left the tube, what is very easy to see as it is completely transparent, we can begin purging our extraction. If you wish, you can refreeze the tube for a second round to maximize the oil production.
Since it is made of glass, it assures us that it does not release particles or contaminants of any kind, nor react with the gas.
Killer Bee BHO extractor features:
- Borosilicate glass
- Diameter: 6cm
- Length: 30.5cm, 34cm with the cap
- Thickness: 5mm